Skip to main content

E800 Load Printer Paper

April 16, 2024

Description

How to load receipt printer paper in the E800 terminal

What's in this article?

When the printer is out of paper, the yellow Paper Out indicator lights up. 

To load new paper in the E800 terminal printer

  1. Open the external printer cover by inserting your finger into either of the two recessed areas at the side of the door and pull outward.

    E800 printer cover with two red arrows indicating the recessed areas to pull on the opening. The paper out light is lit.

  2. Press the orange latch to open the internal printer cover. The printer door will open.

    The black internal printer cover with the orange tab clearly visible on the right.

  3. If present, remove the empty printer paper dowel. 
  4. Load the paper roll with the shiny side of the paper feeding from the top of the roll.  

    Printer paper installed with the paper fed from the top and the shiny side up.

  5. Leave a small amount of excess paper extending beyond the printer cover, then lift and press the internal printer cover until it snaps closed. The receipt blade will automatically cut any excess paper sticking out. The Paper Out indicator light will turn off.

    The internal printer door closed with a little excess paper sticking out and the Paper Out light off.
  6. Close the  external printer cover. The printer will be ready to use.

Did you find this article helpful?